How to set up Zone Alarm Pro
This was set up using 4.0.146.029.  Verified same procedure works on 5.5.062.004.

*CAUTION*
Older versions of Zone Alarm are known to cause Rollback Inconsistencies!

There are dozens of documented cases of Zone Alarm blocking DC++ even though it's been properly allowed. The only fix is to uninstall ZA!!

•After installing Zone Alarm, start up DC++.  Immediately, you will see a similar dialog with the following:

* Check Remember this answer the next time I use this program
 
•Following that dialog, you will see another:

* Check Remember this answer the next time I use this program
 
•That's it! DC++ should now be set up!
 
•If you're still having problems, then double check the programs security settings.   Go to Program Control -> Programs and find DC++. 

Make sure DC++ has green check marks in Access Trusted / Internet and Server Trusted / Internet.
 

feedback form

feedback form

Any feedback you provide (corrections, updates or suggestions) are sent to the owner of this FAQ
and anyone else involved in writing or editing this item.

by USR56K edited by JMGullett
last modified: 2007-02-01 16:03:40