First way is through telnet. Set your IP on your LAN connection under TCP/IP protocol to 192.168.7.X where X can be any number except 1. The subnet mask is 255.255.255.0
Then use telnet to connect to 192.168.7.1 Like so: Start > Run... > telnet Type "o 192.168.7.1" to connect to modem.
Second way is through serial cable. Connect the serial cable to your modem and serial port on your PC. Run HyperTerminal and use these settings:
Bits per second: 9600 Data bits: 8 Parity: none Stop bits: 1 Flow control: none
