Noise may be defined as the combination of unwanted interfering signal sources whether it comes from crosstalk, radio frequency interference, distortion, or random signals created by thermal energy. Noise impairs the detection of the smallest analog levels which may be resolved within the demodulator. The noise level along with the maximum clip level of an analog signal path set the available amplitude dynamic range.
The maximum data rate of a modem is limited by the available frequency range (bandwidth) and signal-to-noise ratio (SNR) which is amplitude dynamic range. If more of either is available, more bits may be transferred per second. In an audio analogy, the better (higher) the signal-to-noise ratio is, the easier it is to 'hear' the desired signal above the noise. The same principle applies here. The better the margin (the difference between the signal and the noise) the easier it is for your modem to pick out the DSL signal from the background noise.
 feedback form
 feedback form
by Mike  edited by KeysCapt
last modified: 2004-01-02 12:04:39 |
