If you happen to purchase a modem from a friend, online, or received a modem for another ISP, don't worry there's still hope!
WARNING!! This should be for advanced users only. This may cause serious problems to your dsl modem if the necessary precautions are not taken. Again, only do this if you find out your modem is unable to sync on your line.
For the SpeedStream 4060/3060:
At this time, there is no defined software to change this.
For the Westell Wirespeed:
At the main screen of the program, hit ctrl+alt+f7.
Proceed to the PVC tab.
The following items are found: VPI and VCI Table.
If you do not know your VPI/VCI contact your local telco. They will tell you; but don't disclose what ISP you use. Otherwise, try these common settings from across the globe:
| Country/ISP | VPI | VCI | | US,BellSouth835US,Verizon035US,Covad | 0 | 35 | | UK, BellSouth | 8 | 35 | | Belgium | 8 | 35 | | Denmark, Orang | 8 | 35 | | France, Wanado | 0 | 35 | | France | 8 | 67 | | Italy | 8 | 35 | | Netherlands | 8 | 35 | | Singapore Pacificnet | 0 | 100 |
(List Credit to »steve-parker.org)
So if you're in the US, try using either 0/35 or 8/35. One of those settings will allow your modem to sync on the line.
Scroll down on the VPI or VCI.
Go to the VCI or VPI table and select the correct number.
Click EDIT VCI or EDIT VPI and click "enable" and then OK.
Click apply again.
Close and reboot modem.
ActionTec Hybrid:
At the main screen of the program, hit ctrl+p
Go to the configurations tab
configure settings there. they are similar to the one above.
Broadxent Blaster:
Set your device to
IP: 192.168.1.2
Subnet: 255.255.255.0
Restart
In your web browser put 192.168.1.1
username: USER
PASSWORD: 8012U
configure through the web interface.
If configured properly, the modem should sync.
 feedback form
 feedback form
by thebombs12  edited by Meteor Dive
last modified: 2008-11-15 03:26:52 |
