Here are the directions:
1. Double click the Sygate tray icon
2. Tools > Advanced Rules > Add
3. In rule descriptions, type: BBR
4. Select "Allow Traffic," select your NIC (Network Interface Card) and select your screen saver mode.
7. In the Hosts tab, select "IP Addresses"
8. Type in: 206.65.191.129,209.123.109.175,209.191.132.40,66.80.133.170,216.254.95.40
9. Hit Protocols and Ports tab
10. Check "Echo Reply - 0" and "Echo Request - 8"
11.Under Traffic direction, select Both Directions. Click OK twice and close Sygate.
You're done.
 feedback form
 feedback form
by Lanik  edited by JMGullett
last modified: 2007-02-26 14:36:44 |
