Your Sony Network Adaptor came with a network setup cdrom, and some demos on the same disk. After installing the adaptor (please follow the instruction manual - and make sure your PS2 is unplugged from the power), and connecting your ethernet cable (not included in the package) to the network adaptor port behind the yellow protection label, you should boot the network setup disk and run the configuration program.
The configuration program will attempt to detect whether the adaptor is present or not, then ask you what kind of setup you wish to do (dialup, or broadband) and then whether the setup should be automatic (PPPoE and DHCP) or manually detailed.
If the connection test fails, well, the rest of this FAQ might help.
 feedback form
 feedback form
|
