If you are sure that the problem of being unpingable is not software related (software firewalls, etc.), then try the following:

This applies to firmware 4.3.2.0

1. Telnet to the Speedtouch: telnet 10.0.0.138

2. Login (the default username is: Administrator) with no password

3. Enter the following commands (one line at a time):
service system ifadd name=PING_RESPONDER group=wan
saveall

Source:
»speedtouch.net.nz/forum/topic.as···C_ID=383

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by sabb0ur edited by MacGyver
last modified: 2006-06-13 15:53:14