---
How to Configure Windows 9x or Me for DHCP -
»kb.earthlink.net/case.asp?article=3067
---
How to Configure Windows NT 4 for DHCP -
»kb.earthlink.net/case.asp?article=3077
---
How to Configure Windows 2000 for DHCP -
»kb.earthlink.net/case.asp?article=3073
---
How to Configure Windows XP for DHCP -
»kb.earthlink.net/case.asp?article=23811
---
How to Configure EarthLink 5 for DHCP (Home Networking) -
»kb.earthlink.net/case.asp?article=3081
---
How to Configure a Macintosh OS 8.6 - 9.22 for DHCP -
»kb.earthlink.net/case.asp?article=639
---
How to Configure a Macintosh OS X 10.0 - 10.2 Network Panel for DHCP
»kb.earthlink.net/case.asp?article=8333
---

Note: You may need to Release and then Renew your IP address once you connect the device so it's built in DHCP server can assign your PC a Private IP Address.

How To Release and/or Renew IP Addresses on Windows XP | 2000 | NT
»compnetworking.about.com/cs/wind···rwxp.htm

How To Release and/or Renew IP Addresses on Windows 95 | 98 | ME
»compnetworking.about.com/cs/win9···rw9x.htm

On some Windows 95 | 98 | ME Systems you may need to reboot your PC to get an IP from the devices DHCP server if the above fails.

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by Doctor Olds
last modified: 2007-10-09 01:11:34